HomeProductsAbout UsRequest Literature
ProductsPharmaceutical Suite-StationsMini-ConsolesWall StationsPedestal StationMobile StationMightyMountOperator Interface Mountings
Special Designs
MiniStation
MiniStation

The MiniStation features the industry standard Vertica arm, providing up to 30" of ergonomic counterbalanced vertical adjustment. Mix and match from STRONGARM’s ever increasing array of displays, touchscreens, keyboards, pointers and options below to create your optimal system.

Your system will arrive pre-assembled, tested and ready-to-install.

You’ll also benefit from the advantages of split architecture, in which the PC is separated from the display. Options include an internal micro PC, a desktop PC in a protective local enclosure, or a remote PC up to 3000' away connected by a simple CAT 5 cable.

Also available in stainless steel NEMA 4X version.


Download the MiniStation Typical Dimensions Sheet

Galleries
Click here to view the MiniStation Photo Gallery

 
 
Vertical Travel  
Vertica 13 inches
Vertica L 23 inches
Vertica XL 30 inches
Counterbalance Capacity  
Vertica 100 lbs
Vertica L 75 lbs
Vertica XL 50 lbs
Load Limitations   320 ft/lb maximum on swivel joint. Consult factory for larger loads.
Cable Passageway   1.4" diameter sealed continuous passageway.
Material   12L14 carbon steel 14 gauge
NEMA Rating   NEMA 4/12
Finish   Powder coated or painted finish. Available in a variety of stock colors (custom colors also available upon request).
Rotational Stops–Standard  
Enclosure Swivel stop at ±165°
Post Top Mount stop at ±165°
Wall Mount stop at ±90°
Machine Top Mount stop at ±165°
Middle Joint stop at ±126°
Rigid Wall Mount stop at ±126°
Release Handle   The standard enclosure handle allows the customer to cut the handle tube to length. Handle supports are cast aluminum with black anodize finish.
Construction   Laser-cut and continuous TIG seam welded.
Reinforcement   Folded and welded stiffener designed for pendant arm mounting.
Cut-outs   Vertica arm and handle standard, O.I. and pushbuttons as specified.
Agency Approval   UL 508c labeled (available as option).
Rear Door   (1) full size standard.
Front Door   Optional, in lieu of rear door.
Side Doors   As required for access to cabling and drives
Gaskets   Neoprene/EPDM/SBR Blend #SCE42B
Latches   Rear door: EMKA brand 1000 series 1/4 turn, slotted.
Side door: EMKA brand 1022 series 1/4 turn, slotted.
Hinges   Rear door: lift-off hinges, (2) typically.
Side door: concealed hinges.
     

 

Home · Systems · About Us · Request Literature
215.443.3400 · Fax 215.443.3002 · 425 Caredean Drive · Horsham, PA 19044
© 2004-2011 Strongarm, Inc. Strongarm and the Strongarm logo are trademarks of Strongarm, Inc.
All other trademarks are the property of their respective owners.